As an Amazon Associate I earn from qualifying purchases.
daier #ad - 2. 0 3-pin female connector plughave not cable x 20 pcs. 2. 0 3-pin male connector plug with Wire x 20 pcs. Product name:jst 2. 0 ph 3pin connector Plug With Wires. Note:the pitch is 2mm/0078 inch, please check the third picture about the size.
elechawk #ad - 22awg soft silicone wire. Suitable for tiny whoop like jrc h36 h67 upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone.
Innovateking #ad - Input charge connector: male 4mm Banana Plug, it needs to connect to LiPo charger for charging battery. Any issue, please feel free to contact us and we are here for you. This new parallel charger board allows you to charge up to twelve lipo battery with UMX-style connectors at once.
EBOOT #ad - Jst connectors dimension: each cable wire length is approx. Common usage: this 2 pin connector for mini rc helicopter, LED strips, twinkle light, LED belt light, LED wall-washers, indoor 3D plane, curtain light, etc.
Wire core: 7 section 011 mm zinc copper, external diameter is 09 mm, tail zinc size is 3 mm, standard size, suitable for common uses. Match well with: 26 awg 1.
elechawk #ad - This kit includes ph2. 0mm 2/3/4/5/6/7/8/9/10 pin connector, 90pcs pre-crimped wire, Heat shrinkable tube and 1pcs tweezers. Suitable for arduino mkr1010, tiny whoop, mkr zero and mkr vidor 4000 lipo socket and tiny drone, JRC H36 H67 Upgrading Blade Inductrix, e010 e013, and KingKong Tiny drone.
Widely used for circuit boards, household appliances, computers, circuit boards, LED lighting, balance lead, speakers, Lipo battery, monitors, copiers, FAX machines, medical equipment, electronic toys.
Karcy #ad - Suitable for diy assembly of lithium batteries and A123 batteries. Male female balance extension is great for balancing batteries while charging and for checking voltage when the balance lead isn't accessible.
OliRC #ad - Quantity: 6pcs. Jst to ph 2p 22awg 5cm Soft Silicone Wire. Convert the 120sr / mqx / jst pluged batteries into the smaller mCP-X plug.
SIM&NAT #ad - Sim&nat silicone wire connector for jst - excellent Flexibility & Good Conductors: Tin plated copper, with good oxidative stability and weldability.
Package included: 10 pairs 10pcs Female + 10pcs Male Connector Charging Line for JST. Sim&nat pigtail wire for jst is mainly used for mini RC helicopter, Li-Po battery, indoor 3D plane, Esc Bec Board and NiMh battery connection and etc.
1. daier
#ad20 Sets Mini Micro Jst 2.0 Ph 3 Pin Connector Plug Male With 150mm Cable & Female by daier
#adMore information #ad
| Brand | daier #ad |
| Manufacturer | daier #ad |
More information #ad
2. elechawk
#ad10pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix E010 E013
#adMore information #ad
Upgrade jst-ph 2. 0 connector, the pins will not loose easily. Must have for HV batteries and high performance. 80mm length/per unit. This is the male and female connector cable,.| Brand | elechawk #ad |
| Manufacturer | elechawk #ad |
| Part Number | fgt5 |
More information #ad
3. Innovateking
#adInnovateking 2S 7.4V LiPo Parallel Charging Board JST-PH2.0 3-Pin 4.0mm Banana Plug 2S LiPo Battery Charge Board for Balance Charger Imax B6 etc
#adMore information #ad
Perfect for batteries used in the blade 130 x, Mig, mCP X BL, UMX Beast, Carbon Cub and Sbach 342!. Board size: 63*32mm, weight: 25g088ounces. Because it charges in parallel, you can charge as few as one or as many as twelve batteries of same capacities at the same time.| Brand | Innovateking #ad |
| Manufacturer | Innovateking #ad |
| Height | 0.04 Inches |
| Length | 2.48 Inches |
| Width | 1.26 Inches |
| Part Number | 50L4917YRY |
More information #ad
4. EBOOT
#adEBoot 20 Pairs 1.25 mm JST 2 Pin Micro Electrical Male and Female Connector Plug with 10 cm Wire Cable
#adWire core: 7 section 011 mm zinc copper, external diameter is 09 mm, tail zinc size is 3 mm, standard size, suitable for common uses. Match well with: 26 awg 1.
More information #ad
25 mm jst 2 pin micro male connector match well with female connector, easy to install and use. 10 cm/ 3. 9 inches, the cable wire diameter is 1. 25 mm, micro size can fit your needs. Quantity: 20 pairs in total, 20 x jst 2p female connectors with 10 cm wires and 20 x JST 2P male connectors with 10 cm wires, enough for your sue.| Brand | EBOOT #ad |
| Manufacturer | eBoot #ad |
| Height | 0.2 Inches |
| Length | 4.72 Inches |
| Weight | 0.04 Pounds |
| Width | 3.94 Inches |
| Part Number | 10099220 |
| Model | 10099220 |
More information #ad
5. daier
#adDaier 20 Sets Mini Micro Sh 1.0 Jst 2-Pin Connector Plug Male with 150Mm Cable & Female
#addaier #ad - Awg:26Awg. Cable length : 150mm. Jst sh 1. 0-2 pin female Connector x 20 pcs. Jst sh 1. 0-2 pin male connector Plug with 15cm Wire x 20 pcs.More information #ad
| Brand | daier #ad |
| Manufacturer | daier #ad |
| Height | 0.2 Inches |
| Length | 5 Inches |
| Width | 5 Inches |
| Part Number | unknown |
More information #ad
6. elechawk
#adPH 2.0 Connector Pre-Crimped Cable Kit Compatible with JST-PH2.0mm for Battery JJRC H36 Blade Inductrix Tiny Whoop Arduino mkr1010 MKR Zero and MKR Vidor 4000 Connector&Wire
#adWidely used for circuit boards, household appliances, computers, circuit boards, LED lighting, balance lead, speakers, Lipo battery, monitors, copiers, FAX machines, medical equipment, electronic toys.
More information #ad
It is perfectly Compatible with JST-PH2. 0 connector. This set of connectors is easy to assemble, no crimping tool needed, just plug the pin to the housing. The pre-crimped cable is 24AWG soft silicone wire and 16cm6. 3inch length.| Brand | elechawk #ad |
| Manufacturer | YUYING #ad |
| Height | 0.91 Inches |
| Length | 7.09 Inches |
| Width | 3.94 Inches |
| Part Number | PH2.0KIT |
More information #ad
7. Karcy
#adKarcy 10pcs Male Female Balance Wire Extention 10cm Adapter LiPo Battery Cable 2S 3Pins 7.4V
#adMore information #ad
10cmm length 7. 4v 22awg silicone wire. Jst-xh connector - the most common style lipo balance plug. This balance plug extension with a wire plug. 10pcs 3pins plug, for 2S Lipo balance extension wire adapter.| Brand | Karcy #ad |
| Manufacturer | Karcy #ad |
| Part Number | 196 |
More information #ad
8. OliRC
#adOliRC 6pcs JST to PH 2P for E-Flite 120 SR to Blade mCP-X Ultra Micro Lipo Battery Adapter CablesC56-6
#adMore information #ad
| Brand | OliRC #ad |
| Manufacturer | OliRC #ad |
| Height | 0.39 Inches |
| Length | 3.5 Inches |
| Weight | 0.02 Pounds |
| Width | 2.4 Inches |
| Part Number | Adapter Wire |
More information #ad
9. SIM&NAT
#adSIM&NAT 5.9 inch 2 Pin Male Female for JST RCY Plug Connectors Cable Wire for RC Toys Battery 10 Pair, 20 Gauge Silicone Connector for JST
#adPackage included: 10 pairs 10pcs Female + 10pcs Male Connector Charging Line for JST. Sim&nat pigtail wire for jst is mainly used for mini RC helicopter, Li-Po battery, indoor 3D plane, Esc Bec Board and NiMh battery connection and etc.
More information #ad
Material: 100% silicone insulated. According to market investigation, many customers feedback that insulation which make from the PVC is easy to burn during using and even ruin the machine. Length of cable: 15cm / 5. 9"; 20 awg.| Brand | SIM&NAT #ad |
| Manufacturer | Blair Store #ad |
| Part Number | EA-JST-A-015M=10 |
More information #ad
10. LATTECH
#adLATTECH 10 PCS 6 PIN JST PH Female Connector on One Side, 200mm 1007 26 AWG & 10 PCS 6 PIN JST PH Male Connector
#adLATTECH #ad - Pin pitch:2. 0mm. Wire specification:26 AWG. Working temperature：80°c； operating voltage: 80V；Working current:1. 3a. Wire material:Copper + PVC. Total length:200MM.More information #ad
| Brand | LATTECH #ad |
| Manufacturer | LATTECH #ad |
| Height | 0.39 Inches |
| Length | 4.72 Inches |
| Weight | 0.06 Pounds |
| Width | 3.15 Inches |
| Part Number | LAT-PH-100-1 |
More information #ad
