Easy-to-read lcd display makes it simple to monitor set temperature, real temperature, and many other control settings. The clear lcd display makes it easy to monitor set temperature, real temperature, and other control functions, and a temperature alarm can be set to alert you if the appliance is too far outside the operating range you have entered.
Installs quickly using pre-wired cords, making it easier than ever to convert any freezer into a keezer kegerator or a fermentation chamber. This versatile thermostat control unit features both heating and cooling modes with adjustable setpoint and differential, and a waterproof remote temperature probe makes it possible to monitor the temperature inside the appliance while the display is mounted on the outside, allowing you to make adjustments without having to open and close the door of the appliance.
This brand-new kegco digital thermostat power control unit has been specially designed to handle a higher amperage and features a setpoint range of -40 to 100 degrees Fahrenheit, making it suitable for a wide variety of uses such as controlling the power to a freezer or a terrarium. For added convenience, adhesive tape is provided for mounting the display panel to the exterior of the appliance, and a suction cup on the sensor wire allows you to precisely place it inside the appliance and out of the way of its contents.
For easy installation, the kegco rtc-2 utilizes pre-wired cords with a plug that installs into your electrical socket and a receptacle for you to plug your appliance into.
Kegco KC KT85D-L Beer Keg Coupler D System Tap Lever Handle, Black
Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants. This is a commercial grade lever Handle keg coupler. Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg.This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a stainless steel probe. Nsf approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe. This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs.
Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. The kt85d-l is compatible with all domestic brand kegs. This keg tap works with all American "D" system Sankey kegs.
.
Similar products:
• Draft Warehouse Connector Kit For Beer Line
• Beer Line Assembly - 3/16-Inch Id Vinyl - 5 Feet with Hexnut Assembly Clear
• Kegco BF ALA516-5 I.D Air Line Assembly & 2 Snap Clamps, 5'/5/16", Blue
• Sankey to Ball Lock Quick Disconnect Conversion Kit
• Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome
• Kegco Keg Coupler Adapter Kit - Gas and Liquid Posts
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• Red PVC Tubing, 5/16in ID x 10ft
• Kegco Polished Chrome Draft Beer Faucet for Keg Tap Tower Beer Shank or Kegerator
• Beer Line with Stainless Steel Hex nut Connection (304 Grade SS) , 3/16" ID , 5' Clear Hose
Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother 5
Nsf approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe. Draft faucet cap sanitary cover - tap soother. Most individuals are pretty good about regular line cleaning, and I’m sure most kegerators out there are pretty spotless, however it is all of the time between uses where small amounts of beer residue inside of the tap spout can remain after pouring your prized brew.Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg. This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs. Another advantage to these faucet caps is that they can help prevent dried beer from sicking your faucet shut.
. Let’s just say that fruit flies are probably the more tame beasties that can get up in there and taint your beer. An essential part of draft faucet hygiene. Works with nearly all types and brands of draft faucet including Perlick. You probably do not really want to know about all of the things that can get up inside the spout of a draft faucet.
Simple and effective. The cap will keep the insides of your faucet spout nice, clean and bug free until you are ready to pour another beer.
Similar products:
• Kegconnection Kegerator Beer Line Cleaning Kit
• Brewer's Edge UX-CAOO-IQIT Keg Lube, 1 oz.
• 1 X National Chemical Keg Beer Line Cleaner for Kegerators 32 oz Bottle
• Coldtower Kegerator Super Tower Cooler (Upgraded for MAXIMUM cooling)
• Draft Warehouse Extraordinary Jug - Growler Filler
• Kegco KC KT85D-L Beer Keg Coupler D System Tap Lever Handle, Black
• Draft Warehouse Beer Faucet and 4-Inch Shank Kit with Black Handle (2 Pack)
• Faucet Wrench, Deluxe, for Faucet and Nut by Kegconnection
• Draft Warehouse Connector Kit For Beer Line
• Proper Pour 10 Foot Clear 3/16" ID 7/16" OD FDA Approved Vinyl Tube Multi-Purpose- Beer Line, Wine Making, Aquaponics, Air Hose, Etc.
Draft Warehouse Connector Kit For Beer Line
Includes all four items needed to connect a beer line to your draft beer system. The best way to keep faucets clean and sanitary. Protects faucets from insects and bacteria that can get into the spout of your faucet. Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers.This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs. Includes hex nut, tail piece, washer and clamp. Connectors for beer lines. Works with nearly all types and brands of draft faucet including Perlick. Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg.
One set for each conneciton being made. Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants. High quality parts. Includes 1 of each for 1 connection: beer Nut, Washer, Tail piece to connect to 3/16'' ID tube and Clamp.
Simple and effective. Fits 3/16'' tubing.
Similar products:
• Kegco KC KT85D-L Beer Keg Coupler D System Tap Lever Handle, Black
• Beer Line Assembly - 3/16-Inch Id Vinyl - 5 Feet with Hexnut Assembly Clear
• Kegco KC KTS97D-W D System Keg Tap with Black Lever Click Handle, Stainless Steel
• Kegco BF ALA516-5 I.D Air Line Assembly & 2 Snap Clamps, 5'/5/16", Blue
• Proper Pour 10 Foot Clear 3/16" ID 7/16" OD FDA Approved Vinyl Tube Multi-Purpose- Beer Line, Wine Making, Aquaponics, Air Hose, Etc.
• Faucet Wrench, Deluxe, for Faucet and Nut by Kegconnection
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome
• Draft Warehouse Beer Shank Assembly-Stainless Steel, 4-1/8-Inch Long with-1/4-Inch Bore
• Red PVC Tubing, 5/16in ID x 10ft
Taylor Precision Products Classic Series Large Dial Thermometer Freezer/Refrigerator
Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants. Keep your frozen and refrigerated items at the proper temperature with this Freezer/Refrigerator Thermometer from Taylor. Fits 3/16'' tubing. Works with nearly all types and brands of draft faucet including Perlick.. Protects faucets from insects and bacteria that can get into the spout of your faucet. Colorful blue and yellow graphics with safe temperature zone indicators ensure your food is kept at the proper temperature range. This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs.
The extra-large, 3-1/4-inch dial features a glass lens and red pointer making it easy to read. Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg. This freezer/refrigerator thermometer has a range of -20degrees Fahrenheit to 80 degrees Fahrenheit.
This unique design has the ability to either hang from a shelf or stand on its own. The durable, stainless-steel casing provides strength and corrosion resistance. The best way to keep faucets clean and sanitary. One set for each conneciton being made.
Similar products:
• Camco 44124 Fridge Airator with On/Off Switch
• Valterra A10-2606 FridgeCool 11.28 mA Fan with On/Off Switch
• CDN FG80 Refrigerator/Freezer NSF Professional Thermometer
• Wrenwane Digital Refrigerator Freezer Room Thermometer, White
• RCA 5.1 Cubic Foot Chest Freezer
• Taylor Precision Products Classic Design Freezer/Refrigerator Utility Thermometer
• TRUE 920158 Shelf Clip Kit, 4
• Danby DUFM085A2WDD1 Upright Freezer, 8.5 Cubic Feet, White
• 7.1 Cubic Foot Chest Freezer, Black
• Mel cm-240 Hydrion Chlorine Dispenser 10-200 PPM Test Roll Plus Extra Roll
Kegco YH-76S-4 Commercial Grade Four Gauge Secondary Regulator
An essential part of draft faucet hygiene. The extra-large, 3 1/4-inch dial features a glass lens and red pointer making it easy to read. This freezer/refrigerator thermometer has a range of -20degrees Fahrenheit to 80 degrees Fahrenheit. Colorful blue and yellow graphics with safe temperature zone indicators ensure your food is kept at the proper temperature range.The durable, stainless-steel casing provides strength and corrosion resistance. This unique design has the ability to either hang from a shelf or stand on its own. Kegco's yh-76s-4 commercial grade four Gauge Secondary Regulator consistently delivers peak performance and is capable of handling the harsh conditions of commercial environments.
Kegco regulators have a sturdy construction that ensures consistent flow pour after pour. Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers. Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants.
This secondary regulator has its own shut off valves and pressure adjustment knobs and can be mounted onto a wall or the inside of a refrigerator. Secondary regulators are used when attempting to dispense two or more kegs off of the same CO2 tank at different pressures. Includes hex nut, tail piece, washer and clamp.
Similar products:
• Kegco KC KT85D-L Beer Keg Coupler D System Tap Lever Handle, Black
• Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome
• Red PVC Tubing, 5/16in ID x 10ft
• Ball Lock Home Brew Keg Tap Complete Set
• Brewer's Edge UX-CAOO-IQIT Keg Lube, 1 oz.
• Stainless Carbonation Cap with 5/16" Barb Ball Lock Type, Fit Most Soft Drink PET Bottles
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• Precision Brand M6S Micro Seal, Miniature All Stainless Worm Gear Hose Clamp, 5/16" - 7/8" (Pack of 10)
• Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling for Fermentation Kegerator Heating Mat ect
• 5/16" Gas Line Assembly - Ball Lock
Draft Warehouse Beer Shank Assembly-Stainless Steel, 4-1/8-Inch Long with-1/4-Inch Bore
Comes fully assembled. Secondary regulators are used when attempting to dispense two or more kegs off of the same CO2 tank at different pressures. Complete shank with Backnut, flange, Coupling nut, sleeve attached. One set for each conneciton being made. Works with nearly all types and brands of draft faucet including Perlick.Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers. High quality parts. Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg. In order to use this secondary regulator, you will still need a primary regulator onto which one output can connect to the secondary with a piece of air line.
An essential part of draft faucet hygiene. Nsf approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe. Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants.
Comes equipped with four pressure release valves and four gauges that indicate how much CO2 pressure is inside of the kegs. Simple and effective. This regulator has its own shut off valves and T-style adjustment valves that make it easy to adjust the keg pressure when the regulator is cold.
Similar products:
• Draft Warehouse Connector Kit For Beer Line
• Beer Tap Faucet Handle Black - Set of 2
• Beer Line Assembly - 3/16-Inch Id Vinyl - 5 Feet with Hexnut Assembly Clear
• Perlick 630SS Stainless Steel Draft Beer Faucet
• Stainless Steel Beer Faucet With Stainless Steel Lever (All SS304 Contact)
• Connectors for Beer Lines /W Stainlees Steel Tailpiece
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• Chill Passion Jug/ Growler Filler for Perlick Faucets (600 Series 630, 650)
• KegWorks Beer Tap Faucet Handle, Black
• Proper Pour 10 Foot Clear 3/16" ID 7/16" OD FDA Approved Vinyl Tube Multi-Purpose- Beer Line, Wine Making, Aquaponics, Air Hose, Etc.
Draft Warehouse Faucet and Hex Nut Wrench with Vinyl Coating, Heavy Duty
High quality parts. Heavy duty construction. One side is a spanner wrench that helps tighten faucets to shanks or towers. Includes hex nut, tail piece, washer and clamp. Connectors for beer lines. The extra-large, 3 1/4-inch dial features a glass lens and red pointer making it easy to read. This freezer/refrigerator thermometer has a range of -20degrees Fahrenheit to 80 degrees Fahrenheit.Colorful blue and yellow graphics with safe temperature zone indicators ensure your food is kept at the proper temperature range. The durable, stainless-steel casing provides strength and corrosion resistance. This unique design has the ability to either hang from a shelf or stand on its own. Kegco's yh-76s-4 commercial grade four Gauge Secondary Regulator consistently delivers peak performance and is capable of handling the harsh conditions of commercial environments.
Works with nearly all types and brands of draft faucet including Perlick. Fits 3/16'' tubing. Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants. Simple and effective. Comes equipped with four pressure release valves and four gauges that indicate how much CO2 pressure is inside of the kegs.
.
Similar products:
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• Beer Line Assembly - 3/16-Inch Id Vinyl - 5 Feet with Hexnut Assembly Clear
• Brew Tapper Draft Beer Faucet Cap & Brush - 3 Pack
• Draft Warehouse Connector Kit For Beer Line
• Kegco KC KT85D-L Beer Keg Coupler D System Tap Lever Handle, Black
• Kegco BF KPCK32 Deluxe Hand Pump Pressurized Keg Beer Cleaning Kit with 32 oz Cleaner, Black
• Brewery Gaskets 25-Pack EPDM Beer Line Coupling Washer
• Kegco Draft Beer Tower Rebuild Kit
• 1 X Draft Beer Faucet with Brass Lever- Chrome
• Brewer's Edge UX-CAOO-IQIT Keg Lube, 1 oz.
Beer Line Assembly - 5 Feet with Hexnut Assembly Clear - 3/16-Inch Id Vinyl
One set for each conneciton being made. Stainless steel construction. Nsf approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe. This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs. Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers.The best way to keep faucets clean and sanitary. Forged brass locknut. Includes hex nut, washer, tail piece and hose. Standard size 7/8'' diameter fits beer hex nuts. Connect faucet on one end and beer line on the opther end. Made in usa with nsf Listed Food Grade Hose. An essential part of draft faucet hygiene. Simple and effective.
Comes equipped with four pressure release valves and four gauges that indicate how much CO2 pressure is inside of the kegs. Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg. Pre assembled line ready to attach to your draft beer system.
One side is a spanner wrench for hex nuts, other side is to tighten faucets to shanks or towers.
Similar products:
• Kegco KC KT85D-L Beer Keg Coupler D System Tap Lever Handle, Black
• Draft Warehouse Connector Kit For Beer Line
• Kegco BF ALA516-5 I.D Air Line Assembly & 2 Snap Clamps, 5'/5/16", Blue
• Draft Warehouse Beer Faucet and 4-Inch Shank Kit with Black Handle
• Kegco KC KTS97D-W D System Keg Tap with Black Lever Click Handle, Stainless Steel
• Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• Kegco Polished Chrome Draft Beer Faucet for Keg Tap Tower Beer Shank or Kegerator
• 1 X Draft Beer Faucet with Brass Lever- Chrome
• Kegconnection Kegerator Beer Line Cleaning Kit
Kegco BF EBDCK-5T Deluxe Door Mount Kegerator Beer Conversion Kit with 5 lb Co2 Tank, Chrome
Comes equipped with four pressure release valves and four gauges that indicate how much CO2 pressure is inside of the kegs. In order to use this secondary regulator, you will still need a primary regulator onto which one output can connect to the secondary with a piece of air line. Hose length is 5 feet. Includes all components required to make a neer or air line connection.. Nsf approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. Simple and effective. Secondary regulators are used when attempting to dispense two or more kegs off of the same CO2 tank at different pressures.
Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg. Made in usa with nsf Listed Food Grade Hose. Dual gauge regulator: durably constructed to deliver a consistent flow pour after pour, this kegco 762 Commercial Grade Double Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg.
An essential part of draft faucet hygiene. High quality parts. Includes hex nut, washer, tail piece and hose.
Similar products:
• KegWorks 1 X The Tap Soother- Draft Beer Faucet Cap
• Taprite Kegerator Cleaning Kit
• Kegconnection Kegerator Beer Line Cleaning Kit
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• Kegco KC ATK Add A Tap Draft Beer Kegerator Conversion Kit, Chrome
• Kegco BF KPCK32 Deluxe Hand Pump Pressurized Keg Beer Cleaning Kit with 32 oz Cleaner, Black
• 50 Caliber BMG Real Bullet Beer Tap Handle
• Beer Line Cleaning Kit by Kegconnection
• KegWorks Metal Draft Beer Tap Faucet Lock
• Kegco LH BF13R06 Co2 Regulator Y Splitter, Chrome
Kegco BF EB2SHCKBALLKEG5T-5T Two Keg Door Mount Homebrew Kegerator Kit Ball Lock with 5 lb Tank, Chrome
These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear. Comes with two brand new 5 gallon ball lock homebrew kegs: these kegco 5 gallon home brew beer kegs are constructed of 304 grade Stainless Steel and are designed for use will ball lock keg couplers.Simple and effective. High quality parts. Forged brass locknut. Soft vinyl grip. A pressure release valve is conveniently located on the body. Lever handle keg coupler: this nsf-approved kegco kt85d-l "d" system keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs.
Includes hex nut, tail piece, washer and clamp. Connectors for beer lines. Home brew Kits and accessories. Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers. The stainless steel lids fasten tightly to the body and feature a pressure release valve to easily depressurize the keg.
Protects faucets from insects and bacteria that can get into the spout of your faucet. Fully assembled.
Similar products:
• Beer Drip Tray 10" Stainless Steel Wall Mount No Drain
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• Brewer's Edge UX-CAOO-IQIT Keg Lube, 1 oz.
• Universal Kegco type O-Ring Five Gasket Sets for Cornelius Home Brew Keg and Homebrewed With Pride keg sticker
• Inkbird Itc-308 Digital Temperature Controller Outlet Thermostat, 2-stage, 1100w, w/ Sensor
• Five Star PBW Cleaner (Powdered Brewery Wash), 4-Pound Jar
• Brewing Spoon, Stainless Steel, 21-Inch Spoon
• Star San- 32 oz
• HomeBrewStuff 1/2" Stainless Steel Valve Weldless Bulkhead For Home Brew Kettle
• Proper Pour 10 Foot Clear 3/16" ID 7/16" OD FDA Approved Vinyl Tube Multi-Purpose- Beer Line, Wine Making, Aquaponics, Air Hose, Etc.
