19. 5" height. 153 bar. 5. 5" diameter.
Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection
Regulator can be used with co2 with the uniweld part no F36 adaptor, CO2 Cylinder CGA320 to Nitrogen Regulator CGA580 purchased separately. F36 adaptor, co2 cylinder cga320 to Nitrogen Regulator CGA580 purchased separately. For smooth accurate delivery pressure adjustment there is a large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.. Regulator with cga580 inlet connection, 1/4 inch male flare outlet connection, self re-seating relief valve not designed to protect downstream system and easy to read 2 inch Contents Gauge 0-4000 PSI Part No. Nitrogen regulator, Delivery Pressure 0-400 PSI. G8sd with protective rubber gauge boots Part No.
Regulator can be used with CO2 with the Uniweld part no. Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Cga580 inlet connection, 1/4 inch male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots. Gb20s. Uniweld rhp400 is a durable brass piston designed diaphragm Nitrogen Regulator with a Delivery Pressure 0-400 PSI for purging and pressure testing air conditioning and refrigeration systems.
Durable brass piston designed diaphragm, self re-seating relief valve not designed to protect downstream system. G7sd and delivery gauge 0-600 PSI Part No.
Similar products:
• Uniweld H5SMBY Soft Magic Barrier Charging and Vacuum Hose for HVACR System Service with 45-Degree Angle Fittings, 60-Inch
• Uniweld UNF3 Nitrogen Flow Indicator with 1/4-Inch Female Flare Inlet Connection and 1/4-Inch Male Flare Outlet Connection
• 22 Cu. Ft. Nitrogen Air Tank High Pressure Aluminum Gas Cylinder
• Uniweld 40045 Air Chuck with 1/4-Inch M.F. Fitting
• Uniweld NV1 NitroVue Nitrogen Flow Indicator
• Robinair TIF9010A Slimline Refrigerant Electronic Charging/Recover Scale
• Robinair RG3 110V AC, 60 Hz Portable Refrigerant Recovery Machine
• Robinair (15500) VacuMaster Economy Vacuum Pump - 2-Stage, 5 CFM
• CPS VG200 Digital Vacuum gauge
• Robinair 18560 Valve Core Remover/lnstaller
Double Gauge Nitrogen Regulator for Draft Beer
Specs - mixed gas primary regulator - nitrogen tanks, 0-3000 psi lht, 0-60 PSI RHT, 1 Pressure - 1 Product, and 3/8" Outside Diameter with shut-off. Nitrogen regulator, Delivery Pressure 0-400 PSI. Similar in appearance to a CO2 regulator, the notable difference is the nitrogen tank compatible threading.Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Safety valve with manual bleeder valve. Durable brass piston designed diaphragm, self re-seating relief valve not designed to protect downstream system. There's also a convenient air shut off switch for when the gas tank isn't in use.
This nitrogen regulator provides distribution for one keg and is equipped with a nonadjustable "shut down" that blows off excess gas at 55-65 PSI. Cga580 inlet connection, 1/4 inch male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots. With two gauges this kegerator regulator can display the pressure going into the keg and also tell you how much nitrogen is left in your air tank.
Pour your favorite nitro stouts. For use in nitrogen draft beer systems. 2 gauges measure pressure in tank and out. Set screw pressure adjustment.
Similar products:
• KegWorks European Specialty Stout Beer Faucet in Chrome
• 22 Cu. Ft. Nitrogen Air Tank High Pressure Aluminum Gas Cylinder
• 5/16" Gas Line Assembly - Ball Lock
• European Specialty Stout Beer Faucet With Heavy Chrome Tap Handle (1)
• K&B Brewing Stout Beer Faucet
• Beer Line Assembly - 3/16-Inch Id Vinyl - 5 Feet with Hexnut Assembly Clear
• 14321 2 Pair Ball Lock Disconnects for Corny Kegs 2 Gas 2 Liquid, Black/White
• Ball Lock Home Brew Keg Tap Complete Set
• Proper Pour 10 Foot Clear 3/16" ID 7/16" OD FDA Approved Vinyl Tube Multi-Purpose- Beer Line, Wine Making, Aquaponics, Air Hose, Etc.
• Beer Tap Faucet Handle Black - Set of 2
Uniweld H5SMBY Soft Magic Barrier Charging and Vacuum Hose for HVACR System Service with 45-Degree Angle Fittings, 60-Inch
Specially-formulated premium flexible barrier hose is rated for R410A, CFC, R22, HCFC and HFC refrigerants. Uniweld h5smby - 60-inch 150cm soft magic barrier charging and Vacuum Hose with brass knurled 1/4 inch female flare fittings with rubber gasket seats is designed for finger tight connections on air conditioning and refrigeration systems.Protected by the abrasion-resistant outer jacket, the internal spiral synthetic yarn reinforces the rubber and nylon barrier hose wall for high pressure strength, preventing splitting or bubbling at high pressures and temperatures. Maximum working pressure: 800 PSI and a Burst Pressure: 4000 PSI. Premium flexible barrier hose is rated for R410A, CFC, R22, HCFC and HFC Refrigerants.
Maximum working Pressure: 800 PSI. Cga580 inlet connection, 1/4 inch male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots. Solid brass knurled 1/4" female Flare Fittings with Rubber Gasket Seats for Finger Tight Connections. Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Safety valve with manual bleeder valve. Regulator can be used with co2 with the uniweld part no F36 adaptor, CO2 Cylinder CGA320 to Nitrogen Regulator CGA580 purchased separately. Pour your favorite nitro stouts.
Similar products:
• Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection
• Uniweld 40045 Air Chuck with 1/4-Inch M.F. Fitting
• Uniweld UNF3 Nitrogen Flow Indicator with 1/4-Inch Female Flare Inlet Connection and 1/4-Inch Male Flare Outlet Connection
• 22 Cu. Ft. Nitrogen Air Tank High Pressure Aluminum Gas Cylinder
• LASCO 17-4609 1/4-Inch Flare by 1/8-Inch Female Pipe Thread Brass Adapter
• Anderson Metals Brass Tube Fitting, Coupling, 1/4" Flare x 1/8" Female Pipe
• Uniweld RHP800 Nitrogen Regulator with 0-800 PSI Delivery Pressure
• Uniweld 40050 Rubber Plug Adaptor, 1/2-Inch
• Anderson Metals Brass Tube Fitting, Half-Union, 1/4" Flare x 1/4" Male Pipe
• Yellow Jacket 93843 ¼” Compact Ball Valve - add to hoses for charging and recovery – 45 degree angle – ¼” F.FL. x ¼” M.FL
KegWorks European Specialty Stout Beer Faucet in Chrome
These faucets must be used to dispense Guinness stout, murphy's stout and others. Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Remove restrictor to use for any beer. Stout faucet nitrogen regulator, Delivery Pressure 0-400 PSI. Regulator can be used with co2 with the uniweld part no F36 adaptor, CO2 Cylinder CGA320 to Nitrogen Regulator CGA580 purchased separately.Burst pressure: 4000 PSI. Solid brass knurled 1/4" female Flare Fittings with Rubber Gasket Seats for Finger Tight Connections. Cga580 inlet connection, 1/4 inch male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots. Durable brass piston designed diaphragm, self re-seating relief valve not designed to protect downstream system.
Does not include faucet handle. Used for most nitrogen beers. 60" 150cm soft magic barrier charging and Vacuum Hose for Air Conditioning and Refrigeration System Service. Premium flexible barrier hose is rated for R410A, R22, CFC, HCFC and HFC Refrigerants. Maximum working Pressure: 800 PSI. Made of heavy duty metal with a chrome finish.
Similar products:
• Double Gauge Nitrogen Regulator for Draft Beer
• CO2 Regulator to Nitrogen Tank Adapter
• 22 Cu. Ft. Nitrogen Air Tank High Pressure Aluminum Gas Cylinder
• Beer Tap Faucet Handle Black - Set of 2
• Beer Line Assembly - 3/16-Inch Id Vinyl - 5 Feet with Hexnut Assembly Clear
• 5/16" Gas Line Assembly - Ball Lock
• Nitrogen Regulator, By Kegconnection
• Draft Warehouse 3-1/2-Inch Long Beer Nipple Shank Assembly, Chrome Plated, 3/16-Inch Bore
• KegWorks Beer Tap Faucet Handle, Black
• Draft Warehouse 4-1/2-Inch Long Beer Nipple Shank Assembly, Chrome Plated, 3/16-Inch Bore
Uniweld UNF3 Nitrogen Flow Indicator with 1/4-Inch Female Flare Inlet Connection and 1/4-Inch Male Flare Outlet Connection
Cga580 inlet connection, 1/4 inch male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots. New and improved version is the uniweld nv1 nitrogen flow indicator* Uniweld UNF3 Nitrogen Flow Indicator provides extremely low pressure precision gas flow control for nitrogen purging applications during the brazing of copper tubing in Air Conditioning and Refrigeration systems.Burst pressure: 4000 PSI. The unf3 maximum inlet pressure is 50 psi and must be connected to a Nitrogen Regulator with 1/4 inch male flare outlet connection Uniweld Part No. Solid brass knurled 1/4" female Flare Fittings with Rubber Gasket Seats for Finger Tight Connections. The nitrogen must be flowing to displace the oxygen inside the tubing during the brazing process, preventing internal oxidation and the resulting scale.
Made of heavy duty metal with a chrome finish. Safety valve with manual bleeder valve. Pour your favorite nitro stouts. For use in nitrogen draft beer systems. 2 gauges measure pressure in tank and out. Set screw pressure adjustment.
Similar products:
• Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection
• Uniweld H5SMBY Soft Magic Barrier Charging and Vacuum Hose for HVACR System Service with 45-Degree Angle Fittings, 60-Inch
• Uniweld MTF-5 Cap'n Hook 5 Flame Tip
• Refrigeration Technologies RT201B NYLOG-GASKET/THREAD SEALANT*##
• Yellow Jacket 29985 Plus II 1/4" Hose with Compact Ball Valve, 60" (Pack of 3)
• Robinair TIF9010A Slimline Refrigerant Electronic Charging/Recover Scale
• Robinair 18560 Valve Core Remover/lnstaller
• Mastercool (62010) Gray/Yellow Refrigerant Recovery Tank - 30 lb. Capacity
• CPS VG200 Digital Vacuum gauge
• Yellow Jacket 93842 Mini Ball Valve (3 Pack)
CO2 Regulator to Nitrogen Tank Adapter
These faucets must be used to dispense Guinness stout, murphy's stout and others. Nitrogen regulator, Delivery Pressure 0-400 PSI. Nitrogen flow indicator uses a float ball to visually confirm the nitrogen is flowing during the brazing of copper tubing in HVACR systems. Premium flexible barrier hose is rated for R410A, CFC, R22, HCFC and HFC Refrigerants.Maximum working Pressure: 800 PSI. Burst pressure: 4000 PSI. Specs - dimensions: 2"l and connects CGA 580 valve to a CO2 regulator. If you already have a co2 regulator and want to use it on a nitrogen air tank, this is the piece needed to make the conversion. Durable brass piston designed diaphragm, self re-seating relief valve not designed to protect downstream system.
Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Made of heavy duty metal with a chrome finish. Maximum inlet Pressure 50 PSI. Safety valve with manual bleeder valve. Pour your favorite nitro stouts. For use in nitrogen draft beer systems. 2 gauges measure pressure in tank and out.
Similar products:
• KegWorks European Specialty Stout Beer Faucet in Chrome
• Double Gauge Nitrogen Regulator for Draft Beer
• 22 Cu. Ft. Nitrogen Air Tank High Pressure Aluminum Gas Cylinder
• Guinness Keg Coupler - U System
• Beer Line Assembly - 3/16-Inch Id Vinyl - 5 Feet with Hexnut Assembly Clear
• Proper Pour 10 Foot Clear 3/16" ID 7/16" OD FDA Approved Vinyl Tube Multi-Purpose- Beer Line, Wine Making, Aquaponics, Air Hose, Etc.
• Draft Warehouse Connector Kit For Beer Line
• Kegco KC KT85D-L Beer Keg Coupler D System Tap Lever Handle, Black
• Nitrogen Regulator to CO2 Tank Adapter
• K&B Brewing Stout Beer Faucet
Ball Lock - 5/16" Gas Line Assembly
60" 150cm soft magic barrier charging and Vacuum Hose for Air Conditioning and Refrigeration System Service. Nitrogen flow indicator uses a float ball to visually confirm the nitrogen is flowing during the brazing of copper tubing in HVACR systems. Clamp the open end to the gas "out" of your regulator or CO2 manifold, hook up the ball lock quick disconnect fitting to your Cornelius keg, and you're ready to impart intense carbonation on any ball lock keg.3' of 5/16 inch. Solid brass knurled 1/4" female Flare Fittings with Rubber Gasket Seats for Finger Tight Connections. These faucets must be used to dispense Guinness stout, murphy's stout and others. Maximum inlet Pressure 50 PSI. Provides extremely low pressure 3 to 4 CFH precision gas flow control for nitrogen purging applications.
Cga580 inlet connection, 1/4 inch male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots. 2 hose clamps and 5/16 inch. Co2 regulator to Nitrogen Tank Adapter. Use a co2 regulator on a nitrogen tank with this affordable adapter. Dimensions: 2"L. Saves you from buying a nitrogen regulator if you own CO2 regulator.
Similar products:
• Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome
• Stainless Carbonation Cap with 5/16" Barb Ball Lock Type, Fit Most Soft Drink PET Bottles
• 3/16" Beer Line Assembly - Ball Lock
• 5lb co2 Tank- New Aluminum Cylinder with CGA320 Valve
• 7963 3/16 Inch Beer Line Assembly - BALL Lock, Multiple
• Stainless Steel Carbonation Cap by The Weekend Brewer
• Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve (5 LB, Brushed)
• Universal Kegco type O-Ring Five Gasket Sets for Cornelius Home Brew Keg and Homebrewed With Pride keg sticker
• Brewer's Edge UX-CAOO-IQIT Keg Lube, 1 oz.
• Draft Warehouse Air Distributor Co2 Manifold
Uniweld 40045 Air Chuck with 1/4-Inch M.F. Fitting
Pour your favorite nitro stouts. For use in nitrogen draft beer systems. 2 gauges measure pressure in tank and out. Set screw pressure adjustment. Burst pressure: 4000 PSI. Remove restrictor to use for any beer. Durable brass piston designed diaphragm, self re-seating relief valve not designed to protect downstream system.Used for most nitrogen beers. 60" 150cm soft magic barrier charging and Vacuum Hose for Air Conditioning and Refrigeration System Service. Angled head with rubber gasket for easy access and leak-free seating on tire valves. 2 hose clamps and 5/16 inch. Includes a 1/4" Male Flare Fitting. Nitrogen flow indicator, 1/4 inch female Flare Inlet Connection, 1/4 Inch Male Flare Outlet Connection.
Over pressure Safety Relief Rupture Disk. Cga580 inlet connection, 1/4 inch male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots. Uniweld 40045 air tire chuck with 1/4-inch male flare fitting uniweld' s Air Tire Chuck is durable brass construction that is corrosion resistant and has an angled head with a rubber gasket for easy access and leak-free seating on tire valve stems.
Maximum inlet Pressure 50 PSI. Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Made of heavy duty metal with a chrome finish.
Similar products:
• Uniweld H5SMBY Soft Magic Barrier Charging and Vacuum Hose for HVACR System Service with 45-Degree Angle Fittings, 60-Inch
• Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection
• Power Tank CHK-4007 No Air Loss High Pressure Chuck with T-handle and 1/8" MPT Thread
• LASCO 17-4609 1/4-Inch Flare by 1/8-Inch Female Pipe Thread Brass Adapter
• Uniweld H2SSM Service Hose with Brass Knurled 1/4-Inch Female Flare Fittings with Rubber Gasket Seats, 24-Inch
• Uniweld BG1 Blowgun
• Uniweld UNF3 Nitrogen Flow Indicator with 1/4-Inch Female Flare Inlet Connection and 1/4-Inch Male Flare Outlet Connection
• Uniweld 40022 Rubber Plug Adaptor, 3/4-Inch
• Uniweld RHP800 Nitrogen Regulator with 0-800 PSI Delivery Pressure
• Uniweld MTF-5 Cap'n Hook 5 Flame Tip
5 lb Aluminum CO2 Air Tank
Attaches to uniweld part no h2ssm 2-feet Service Hose or Part No H5SMY 5-Feet Service Hose. In other words, when you receive this tank it will be EMPTY. *. These faucets must be used to dispense Guinness stout, murphy's stout and others. Cga 320 valve. Stamped with required U. S. Used for most nitrogen beers. Nitrogen flow indicator uses a float ball to visually confirm the nitrogen is flowing during the brazing of copper tubing in HVACR systems.Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Burst pressure: 4000 PSI. Angled head with rubber gasket for easy access and leak-free seating on tire valves. 3' of 5/16 inch. Premium flexible barrier hose is rated for R410A, R22, CFC, HCFC and HFC Refrigerants.
Maximum working Pressure: 800 PSI. 5 lb aluminum CO2 air tank for dispensing draft beer. Brand new, not reconditioned. Made of high quality aluminum alloy, making it lighter than steel.
Similar products:
• Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome
• 5/16" Gas Line Assembly - Ball Lock
• Kegco BF ALA516-5 I.D Air Line Assembly & 2 Snap Clamps, 5'/5/16", Blue
• Kegco KC KT85D-L Beer Keg Coupler D System Tap Lever Handle, Black
• Brewer's Edge UX-CAOO-IQIT Keg Lube, 1 oz.
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• Beer Line Assembly - 3/16-Inch Id Vinyl - 5 Feet with Hexnut Assembly Clear
• Kegco 762-2 - Commercial Grade Double Gauge Two Product Regulator
• 3/16" Beer Line Assembly - Ball Lock
• Stainless Carbonation Cap with 5/16" Barb Ball Lock Type, Fit Most Soft Drink PET Bottles
European Specialty Stout Beer Faucet With Heavy Chrome Tap Handle 1
These faucets are the genuine and correct model used to dispense Guinness stout, murphy's stout, beamish and Boddingtons. Just like in your favorite tavern, the handle has a spring loaded-like action. 5 lb aluminum CO2 air tank for dispensing draft beer. Brand new, not reconditioned. Made of high quality aluminum alloy, making it lighter than steel.Has a capacity of 6 - 8 half kegs. Tanks are shipped empty. This faucet is the correct one to dispense Guinness stout, murphy's stout and other thick creamy beers. Premium flexible barrier hose is rated for R410A, R22, CFC, HCFC and HFC Refrigerants. Maximum working Pressure: 800 PSI. Features: chrome finish. Regulator can be used with co2 with the uniweld part no F36 adaptor, CO2 Cylinder CGA320 to Nitrogen Regulator CGA580 purchased separately.
Remove restrictor to use for any beer. Pour your favorite nitro stouts. For use in nitrogen draft beer systems. 2 gauges measure pressure in tank and out. Set screw pressure adjustment.
Similar products:
• Double Gauge Nitrogen Regulator for Draft Beer
• 5/16" Gas Line Assembly - Ball Lock
• Beer Line Assembly - 3/16-Inch Id Vinyl - 5 Feet with Hexnut Assembly Clear
• 22 Cu. Ft. Nitrogen Air Tank High Pressure Aluminum Gas Cylinder
• 5Q-657J-3OLD Ball-Lock MFL Dis-Connect Set with Swivel Nuts (2) 5/16 Gas, 1/4 Liquid
• Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
• CO2 Regulator to Nitrogen Tank Adapter
• Ball Lock Home Brew Keg Tap MFL Coupler Set
• Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome
• Kegco BF ALA516-5 I.D Air Line Assembly & 2 Snap Clamps, 5'/5/16", Blue
